Home > 18 SOUND > 18 Sound Pro Audio Speakers > 15" Low Frequency Speakers >

18 SOUND 15NLW9401
18 Sound 15NLW9401 15" Subwoofer Speaker


 
Our Price: $399.99

Quantity in Stock:(Out of Stock)


Availability:: Usually Ships in 24 to 48 Hours
Product Code: 18-SOUND-15NLW9401
Qty:

Description
 

18 Sound 15NLW9300 15" Neodymium Subwoofer Speaker

Size: 15"
Power Rating: 1200W RMS
Frequency Response: 37
-2.3kHz
Sensitivity: 97.5db
Impedance: 8 ohms
Voice Coil: 4"
Weight: 19 lbs


The 15NLW9401 is a 15" neodymium extended low frequency loudspeaker with 100mm (4in) diameter voice coil. It has been designed for use as a low bass or subwoofer component in either a more compact reflex, bandpass or horn loaded configuration.

It provides clean, linear, undistorted low frequency reproduction at very high power levels. In its reflex configuration, it can be used in extremely compact enclosures (60 - 130 lt) with tuning frequency as low as 45 Hz. The high grade neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange, resulting in high levels of force factor and power handling with an optimum power to weight ratio.

The high excursion capabilities of the surround and suspension system, in conjunction with the Double Silicon Spider (DSS), enable the 15NLW9401 to achieve high levels of linear travel and maintain full control of the moving mass. The 15NLW9401 features a dedicated fiberglass reinforced water repellent treated cone, showing a high damping mode behaviour. The suspension system provides symmetric large signal characteristics throughout the whole working range, providing low harmonic distortion at different excitation levels.

The 100mm (4in) 4-layers Interleaved Sandwich Voice coil (ISV) provides high levels of thermal stability and durability. The weight of the windings are evenly distributed, providing a uniform motive drive. This, in conjunction with the use of high temperature resistant adhesives, results in an extremely linear motor assembly. The 15NLW9401 ability to perform properly under inclement weather conditions has been achieved using a special coating applied to metal plates.

More information here.



Features
  • 97.5 dB SPL 1W / 1m average sensitivity
  • 100 mm (4 in) Interleaved Sandwich ISV copper clad voice coil
  • 1200W AES power handling
  • Carbon fiber reinforced cone
  • Double Demodulating Rings (DDR) for lower distortion
  • Improved dissipation via onboard aluminum heatsink and multi-cell air diffractor
  • External Neodymium magnet assembly
  • Weather protected cone and plates for outdoor usage
  • Recommended for line array and wedge monitor applications

Share your knowledge of this product. Be the first to write a review »