Home > 18 SOUND > 18 Sound Pro Audio Speakers > 12" Speakers >

18 SOUND 12W750
18 Sound 12W750 Bass Speaker


 
Alternative Views:


Our Price: $195.99

Quantity in Stock:(Out of Stock)


Availability:: Usually Ships in 24 to 48 Hours
Product Code: 18-SOUND-12W750
Qty:

Description
 

18 Sound 12W750 12" Bass Speaker

Specifications: Size: 12"
Power Rating: 600W RMS
Frequency Response: 50-4.6kHz
Sensitivity: 97dB
Impedance: 8 ohms
Voice Coil: 3"
Resonant Frequency: 49 Hz
Weight: 18.25 lbs.

The 12W750 loudspeaker combines the excellent linearity, good efficiency and high power handling of the 15W750 model but in a 12 inch (300mm) chassis for use in more compact systems. It is primarily intended for application in compact reflex and band-pass enclosures but can also be used for horn loaded configurations.

The curvilinear paper cone has been made from a special high strength woodpulp designed to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference. The cone is carried by an unusually deep profile, triple roll suspension made from a polycotton material which is more resistant to aging and fatigue than traditional cotton-based ones.

The 75 mm (3 inch) diameter aluminum voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The magnetic structure has been optimized using FEACAD resource to maximize the flux density in the voice coil gap.

Voice coil cooling has been achieved by incorporating airways between the chassis back plate and the top plate of the magnet, allowing heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. Due to the increasing use of audio systems at outdoor events, the ability to perform in adverse weather conditions or in high-humidity areas is an essential feature of the 12W750. This has been achieved using an exclusive cone and magnet plate treatment process which increases resistance to corrosion and renders the cone water repellent.


More information here.




Share your knowledge of this product. Be the first to write a review »