Home > CLEARANCE >

18 SOUND XR1464C
18 SOUND XR1464C Horn Flare


 
Our Price: $119.99
Sale Price: $29.99
Savings: $90.00

Quantity in Stock:(Out of Stock)

Availability:: Usually Ships in 24 to 48 Hours
Product Code: 18-SOUND-XR1464
Qty:

Description
 

18 Sound XR1464C 1.4" Horn Flare

Size: 1.4" throat
Coverage: 60°H x 40°V
Material: Composite Material
Crossover Frequency: 800Hz
Weight: 4 lbs

The XR1464C is a 1.4-nch throat entry constant directivity horn. The horn has been developed to reach optimum performances when it will coupled with 1.4 inch exit Eighteen Sound high frequency compression drivers.
All XR series horns have been designed in order to reach smooth driver frequency response, to maintain constant coverage and directivity and eliminating the midrange narrowing and high frequency beaming problems common of many similar horns on the market.
XR series horns are made in low pressure injected aluminium material in order to obtain the best performance under many point of view:
  • Thermal: aluminum horns are capable to reduce up to 30 degrees C the steady state compression driver working temperature at full power, when compared to equivalent size plastic horn. This gives lower power compression ratio (down to 1dB) and higher driver power handling (30% higher);
  • Mechanical: aluminum horns do not require any support for the compression driver (likes brackets), and at the same time eliminate the problem of horn resonance with optimum waterfall and impulse system behavior.

The XR1464C maintains nominal 60 degree Horizontal x 40 degree Vertical pattern control. It provides consistent on-axis and off-axis frequency response from 1.2kHz to 16kHz in both horizontal and vertical planes. Horn directivity is constant down to 1.2kHz.

More information here.




Features
  • 1.4-inch throat entry
  • High damping composite structure
  • Uniform on-axis and off-axis frequency response
  • 60° x 40° horizontal and vertical constant coverage
  • Very low distortion at high sound pressure
  • Optimized weight thanks to composite material

Share your knowledge of this product. Be the first to write a review »