Home > 18 SOUND > 18 Sound Pro Audio Speakers > 18" Subwoofer Speakers >

18 SOUND 18NLW9601
18 Sound 18NLW9601 Neodymium Subwoofer Speaker

List Price: $999.99
Our Price: $999.99
Sale Price: $897.99
Savings: $102.00

Quantity in Stock:(Out of Stock)

Availability:: Usually Ships in 24 to 48 Hours
Product Code: 18-SOUND-18NLW9601


18 Sound 18NLW9601 18" Neodymium Subwoofer Speaker

Size: 18"
Power Rating: 1800W AES
Frequency Response: 30-2.5kHz
Sensitivity: 97dB
Impedance: 8 ohms
Voice Coil: 5.3"
Resonant Frequency: 32 Hz
Weight: 27.6 lbs.

The 18NLW9601 is an extended low frequency 18 inch neodymium high performance transducer. It is the evolution of the industry standard 18NLW9600. The loudspeaker has been designed for use as a subwoofer component, in either a reflex, bandpass or horn loaded high SPL demanding applications. For optimum results recommended amplifier should be able to deliver 3600 Watt program power.

At the heart of the transducer stands a double silicon spider based on DSS technology that lets the 18NLW9601 control the moving mass with high linearity, showing an exceptional stability of mechanical parameter values in the long term. The state-of-the-art 5.3" diameter ISV copper clad aluminum wire CCAW voice coil shows a inside-outside split winding, four layers design, enabling the 18NLW9601 to handle up to 3600W program power.

Bl force factor, as well as all other electro-dynamic parameters, are linear within the working range. This, together with the exceptional high excursion behavior - 70mm before damage, ±14mm linear Xmax - makes the 18NLW9601 an extremely low distortion, highly dynamic transducer. The already low distortion and sound quality have been further improved by the aluminum demodulating ring (SDR technology), that flatten impedance and phase versus frequency.

The 18NLW9601 has been developed after intense FEA and fluidodynamics simulation and testing, focusing on dissipating the heat generated by the powerful voice coil. Special attention was given to the optimization of air flow into the gap without introducing audible noise. A low-density foam diffractor placed into the vent hole acts as a cooling system, increasing the power handling capability and lowering the power compression figure. The carbon fiber reinforced, straight ribbed cone shows a proprietary resin treatment for extra pulp strength and water repellent properties. A special coating applied to both the top and back plates makes the transducer far more resistant to the corrosive effects of salts and oxidization.

More information here.

Share your knowledge of this product. Be the first to write a review »